Constant Tension Hose Clamps
Features:
1. Constant Tension Worm Drive clamps compensate for changes in temperature, ensuring a leak-free performance.
2. Bellville washer “stack” provides spring action to accommodate increases/decreases in joint diameter, preventing loosening and loss
of clamp load due to temperature fluctuations.
3. Typical uses are in heavy duty truck, high performance automotive, marine, and severe duty industrial applications.
4. Band, Housing and Washers are 300 grade stainless steel, and Screw is 400 series stainless steel. Other material combinations available upon request. Band width is 5/8”. Liner is a welded shield to prevent soft hose from protruding through the band slots.
Specifications
Width(mm) | Thickness(mm) | Diameter(mm) |
15.8 |
0.7 |
26-45 |
15.8 |
0.7 |
32-54 |
15.8 |
0.7 |
45-67 |
15.8 |
0.7 |
57-79 |
15.8 |
0.7 |
70-92 |
15.8 |
0.7 | 83-105 |
15.8 |
0.7 |
96-118 |
15.8 |
0.7 | 108-130 |
15.8 |
0.7 | 121-143 |
15.8 |
0.7 | 134-156 |
15.8 |
0.7 |
146-168 |
15.8 |
0.7 | 159-181 |
15.8 |
0.7 |
172-194 |
15.8 |
0.7 | 184-206 |
15.8 |
0.7 | 197-219 |
15.8 |
0.7 | 210-232 |
Previous: Center Punch Hose Clamps
Next: T-Bolt Hose Clamps